LG XPS 8500 Owner'S Manual Download

Page: 77 / 136

Top Cover

Top Cover

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 13. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.

Prerequisites

Remove the computer cover. See "Removing the Computer Cover" on

page 23.

Remove the front bezel. See "Removing the Front Bezel" on page 31.

Remove the optical drive. See "Removing the Optical Drive" on page 67.

Removing the Top Cover

Pull the release tab, and slide the top cover towards the front of the

computer to release the top-cover tabs from the slots on the top panel.

Pull the top cover away from the top panel.

Set the top cover aside in a secure location.

book.book Page 77 Wednesday, October 10, 2012 10:32 PM

Summary of Contents for XPS 8500









































































































































Search results

Summary of Contents for XPS 8500

Reviews:

Related manuals for XPS 8500

Brands by name

Popular brands

LG XPS 8500, Owner'S Manual

Search results

Summary of Contents for XPS 8500

Reviews:

Related manuals for XPS 8500

Brands by name

Popular brands