LG XPS 8500 Owner'S Manual Download

Page: 23 / 136

Computer Cover

Computer Cover

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 13. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.

CAUTION:

Ensure that sufficient space exists to support the computer with the

computer cover removed—at least 30 cm (1 ft.) of desk top space.

Removing the Computer Cover

NOTE:

Ensure that you remove the security cable from the security cable slot (if

applicable).

Lay the computer on its side with the computer cover facing up.

Remove the thumbscrew that secures the computer cover to the chassis,

using a screw driver, if necessary.

Release the computer cover by sliding it away from the front of the

computer.

Lift the cover away from the computer and set it aside in a secure location.

book.book Page 23 Wednesday, October 10, 2012 10:32 PM

Summary of Contents for XPS 8500









































































































































Search results

Summary of Contents for XPS 8500

Reviews:

Related manuals for XPS 8500

Brands by name

Popular brands

LG XPS 8500, Owner'S Manual

Search results

Summary of Contents for XPS 8500

Reviews:

Related manuals for XPS 8500

Brands by name

Popular brands