
61
MAINTENANCE
EN
G
LI
SH
While
EasyClean
is quick and effective for small
and LIGHT soils, the
Self Clean
feature can be
used to remove HEAVY, built up soils. The intensity
and high heat of the
Self Clean
cycle may result in
smoke which will require the opening up of
windows to provide ventilation. Compared to the
more intense
Self Clean
process, your LG oven
gives you the option of cleaning with LESS HEAT,
LESS TIME, and virtually NO SMOKE OR FUMES.
You can reduce energy use by cleaning light oven
soils with the
EasyClean
feature instead of Self
Clean.
When needed, the oven still provides the
Self
Clean
option for longer, more thorough oven
cleaning for heavier, built up soils.
• For hard to reach areas such as the back surface
of the oven, it is better to use the
Self Clean
cycle.
Benefits of EasyClean
• Helps loosen light soils before hand-cleaning
•
EasyClean
only uses water; no chemical cleaners
• Makes for a better
Self Clean
experience.
- Delays the need for a
Self Clean
cycle
- Minimizes smoke and odors
- Can allow shorter
Self Clean
time
When to Use EasyClean
• Example of oven soiling
Case 1
- Soil pattern: Small drops or spots
- Types of soils: Cheese or other ingredients
- Common food items that can soil your oven:
Pizza
Case 2
- Soil pattern: Light splatter
- Types of soils: Fat/grease
- Common food items that can soil your oven:
Steaks, broiled / Fish, broiled / Meat roasted at
low temperatures
EasyClean Instruction Guide
NOTE
• Allow the oven to cool to room temperature
before using the
EasyClean
cycle. If your oven
cavity is above 150
℉
(65
℃
), the
EasyClean
cycle
will not be activated until the oven cavity cools
down.
• The oven should be level to ensure that the
bottom surface of the oven cavity is entirely
covered by water at the beginning of the
EasyClean
cycle.
• For best results, use distilled or filtered water.
Tap water may leave mineral deposits on the
oven bottom.
• Soil baked on through several cooking cycles will
be more difficult to remove with the
EasyClean
cycle.
• Do not open the oven door during the
EasyClean
cycle. Water will not get hot enough if
the door is opened during the cycle.
1
Remove oven racks and accessories from the
oven.
2
Scrape off and remove any burnt-on debris
with a plastic scraper.
• Suggested plastic scrapers:
- Hard plastic spatula
- Plastic pan scraper
- Plastic paint scraper
- Old credit card
3
Fill a spray bottle (10 oz or 300 ml) with water
and use the spray bottle to thoroughly spray
the inside surfaces of the oven.
4
Use at least 1/5 (2 oz or 60 ml) of the water in
the bottle to completely saturate the soil on
both the walls and in the corners of the oven.
us_main.book.book Page 61 Friday, December 3, 2021 2:25 PM