LG VR6347LV Manual Download Page 33

Page: 33 / 36

TROUBLESHOOTING

A warning message will be given if there is no Dust Bin or Filter housing fitted.

• Is the Dust Bin fitted to the Robot Cleaner?

Open the Dust Bin compartment cover and check to ensure the Dust Bin is in place.

Do NOT leave the Dust Bin Cover open.

• Make sure the Filter housing is assembled onto the Dust Bin.

When the remaining amount of battery power is almost nil, the voice, “Battery is low”, is generated.

• Initiate battery charging of the Robot Cleaner by moving it to the home station.

When the Robot Cleaner is attached to the docking station successfully, it will start the recharging with the recharging start

melody.

Upon a voice message, "Please check if the dust bin is installed with the filter."

Upon a voice message,
"Battery is low. Please move Robot cleaner onto the home station to charge."

Summary of Contents for VR6347LV





































Search results

Summary of Contents for VR6347LV

Reviews:

Related manuals for VR6347LV

Brands by name

Popular brands

LG VR6347LV, Manual

Search results

Summary of Contents for VR6347LV

Reviews:

Related manuals for VR6347LV

Brands by name

Popular brands