26
CLEANING THE DUST BIN FILTER
The Dust Bin Filter consists of a EPA Filter and Sponge Filter.
Clean both the EPA and Sponge filters as per the following sequence.
3. Use a cleaning brush to clean the Sponge Filter.
If using water to clean it, allow it to dry completely
in the shade before refitting.
4. Assemble the EPA and Sponge filters back onto
the Filter housing as per the following sequence.
※
Fit the rectangular locator on the EPA Filter into the
locating slot of the filter body.
※
Be careful not to incorrectly assemble EPA and Sponge
Filter onto the Filter housing.
2. Thoroughly clean out the fine dust particles on the EPA Filter,
with a vacuum cleaner or cleaning brush.
※
Do NOT wash the EPA Filter with water.
Its suction power will be reduced.
• To preserve the performance of the Robot Cleaner, clean the EPA Filter at least once a week,
with a brush or vacuum cleaner.
• The EPA and sponge filters must be fitted to the filter housing before refitting the filter to the dust bin.
Operating the Robot cleaner without the EPA and sponge filters will cause the suction motor to malfunction.
Tip
1. Pull the hook on the left of the EPA Filter module on the
rear side of Dust Bin to separate the EPA Filter and the
sponge.
