21
MOP CLEANING (Selected models only (VR*.LVM))
1. Attach the ultra microfiber mop to the Velcro of the
mop plate as shown in the figure.
2. Firmly slide the Mop Plate into the furrows
until you hear a 'click' sound.
※
Note that, if the Mop Plate is not secured correctly, it
may separate during the cleaning.
3. It is essential that the fixing hooks on the Mop Plate
align correctly on to the fixing grooves on the underside
of the cleaner.
For mop cleaning, mount the mop and mop plate to the Robot Cleaner according to the following instructions:
By attaching the ultra microfiber mop, you can effectively use
the Robot Cleaner to remove dust on hard floor surfaces.
When the mop plate is attached, the Robot Cleaner will not
climb on to carpets or over thresholds, in order to prevent
transferring dirt from the mop.
• To avoid odors, wash any foreign material or dust off the mop after cleaning is completed.
• To avoid staining floors, do not use the ultra microfiber mop to clean
when dirt is contaminated with liquids such as coffee or ink.
• To avoid damage to carpets from the Velcro or dirt transfer from the mop,
do not attempt to clean the carpet while the mop plate or mop is attached.
• Keep the ultra microfiber mop dry. Do not use it on wet surfaces.
If there is moisture on the floor, it can interfere with the navigation and damage the unit.
• Smart Diagnosis feature is not available, when the Mop Plate is attached.
• Some models may not come with Microfibre Mop or Mop Plate.
Fixing hook
Fixing groove
“Click!”
Tip
Caution
Do not cover the bottom
camera sensor by mop.
