background image

4

IMPORTANT SAFETY INSTRUCTIONS

Read and follow all instructions before using your vacuum cleaner to prevent the risk of fire, electric shock, personal injury, or

damage when using the vacuum cleaner. This vacuum is intended for Domestic use only, and must not be used for 

commercial  purposes or applications. This guide does not cover all possible conditions that may occur. Always contact your

service agent or manufacturer about problems that you are not sure of. 

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “WARNING” or “CAUTION.”

These words mean:

This symbol will alert you to hazards or unsafe practices which could cause serious

bodily harm or death.
This symbol will alert you to hazards or unsafe practices which could

cause bodily injury or property damage.

WARNING

CAUTION

WARNING

1.  This appliance is not intended for use by persons 

(including children) with reduced physical, sensory or 

mental capabilities, or lack of experience and knowledge, 

unless they have been given supervision or instruction 

concerning use of the appliance by a person responsible 

for their safety.

2.  Children should be supervised to ensure that they do not 

play with the appliance.

3.  If the supply cord is damaged, it must be replaced by LG 

Electronics Service Agent in order to avoid a hazard

4.  This appliance can be used by children aged from 8 years 

and above and persons with reduced physical, sensory or 

mental capabilities or lack of experience and knowledge if 

they have been given supervision or instruction concerning 

use of the appliance in a safe way and understand 

the hazards involved. Children shall not play with the 

appliance. Cleaning and user maintenance shall not be 

made by children without supervision.

5. 

CAUTION

: This hose contains electrical connections:

     –  do not use to suck up water ;

     – do not immerse in water for cleaning;

     –  the hose should be checked regularly and must not be 

used if damaged.

Summary of Contents for VK9821 Series

































Reviews: