LG VK9821 Series Owner'S Manual Download

Page: 5 / 32

IMPORTANT SAFETY INSTRUCTIONS

• Do not plug in if control switch is not in OFF position.

Personal injury or product damage could result.

• Keep children away and beware of obstructions when

rewinding the cord to prevent personal injury

The cord moves rapidly when rewinding.

• Disconnect electrical supply before servicing or

cleaning the unit or when cleaner is not in use.

Failure to do so could result in electrical shock or personal

injury.

• Do not use vacuum cleaner to pick up anything that is

burning or smoking such as cigarettes, or hot ashes.

Doing so could result in death, fire or electrical shock.

• Do not vacuum flammable or explosive substances

such as gasoline, benzene, thinners, propane (liquids

or gases).

The fumes from these substances can create a fire

hazard or explosion. Doing so could result in death or

personal injury.

• Do not handle plug or vacuum with wet hands.

Doing so could result in death or electrical shock.

• Do not unplug by pulling on cord.

Doing so could result in product damage or electrical

shock. To unplug, grasp the plug, not the cord.

• Keep hair, loose clothing, fingers, and all parts of the

body away from openings and moving parts.

Failure to do so could result in electrical shock or personal

injury.

• Do not pull or carry by cord, use cord as a handle,

close a door on cord, or pull cord around sharp edges

or corners. Do not run vacuum cleaner over cord.

Keep cord away from heated surfaces.

Failure to do so could result in electrical shock or personal

injury, fire or product damage.

• The hose contains electrical wires. Do not use it if it is

damaged, cut or punctured.

Failure to do so could result in death,or electrical shock.

• Do not allow to be used as toy. Close attention is

necessary when used by or near children.

Personal injury or product damage could result.

• Do not use the vacuum cleaner if the power cord or

plug is damaged or faulty.

Personal injury or product damage could result. In these

cases, contact LG Electronics Service Agent to avoid

hazard.

• Do not use vacuum cleaner if it has been under water.

Personal injury or product damage could result. In these

cases, contact LG Electronics Service Agent to avoid

hazard.

• Do not continue to vacuum if any parts appear

missing or damaged.

Personal injury or product damage could result. In these

cases, contact LG Electronics Service Agent to avoid

hazard.

• Do not use an extension cord with this vacuum

cleaner.

Fire hazard or product damage could result.

• Using incorrect voltage.

Using improper voltage may result in damage to the motor

and possible injury to the user. Proper voltage is listed on

the bottom of vacuum cleaner.

• Turn off all controls before unplugging.

Failure to do so could result in electrical shock or personal

injury.

• Do not change the plug in any way.

Failure to do so could result in electrical shock, personal

injury, product damage, or possible death. If plug does

not fit, contact a qualified electrician to install the proper

outlet.

• Repairs to electrical appliances may only be

performed by qualified service engineers.

Improper repairs may lead to serious hazards for the user.

• Do not put fingers near the gear.

Failure to do so could result in personal injury.

WARNING

Gear

WARNING

6. Symbol

means steam.

7. The steam must not be directed towards equipment

containing electrical components, such as the interior of

ovens.

Summary of Contents for VK9821 Series

































Search results

Summary of Contents for VK9821 Series

Reviews:

Related manuals for VK9821 Series

Brands by name

Popular brands

LG VK9821 Series, Owner'S Manual

Search results

Summary of Contents for VK9821 Series

Reviews:

Related manuals for VK9821 Series

Brands by name

Popular brands