98
Installin
g
ACP
ENGLISH
Setting whether to use CH6 function
To connect to the Chiller from the ACP, M (Chiller) shall be selected in CH6 USAGE.
D (demand controller) setting is not used.
- When you press the 'SET' button of the ACP, menu screen will be displayed.
Use up and down (
▲
,
▼
) buttons to select [Contents], and press “SET” button again.
While [CH6 USAGE] is selected, if you press “SET” button, you can select one from D (De-
mand) or M (Modbus).
Setting whether to use air conditioner 0.5°C control function
You can control the desired temperature of the air conditioner in the units of 1°C or 0.5°C in the
ACP.
It is set to control in the units of 1°C at the product ship-out, and if you want the control in the
units of 0.5°C, change the setting as in the following order.
- Caution: 0.5°C control function usage is limited for some indoor/outdoor units or remote con-
trollers.
PQCPC22A0
n
@i
c
f
^
^
{s @chV@usage}
d OmZ@@d
{c
}
chV@usage
d
Click SET
button
Click SET
button
PQCPC22A0
n
@i
c
f
^
^
{s @PNUc}
notHPIOuseHQIZ@Q
{c
}
PNU@c
Q
^
Click SET
button
Click SET
button
