manualshive.com logo in svg

LG V-NET PQCPC22A0, Installation & User Manual

Share
Download
LG V-NET PQCPC22A0 Installation & User Manual Download Page 32

3

2

Ope

r

atin

g

 ACP with ACCS

ENGLISH

View/Change and Delete

1. Manager who is not a super user may only change or delete the schedules registered with his

or her own account.

2. To view/change or delete a schedule, the schedule shall be first selected as in the following

picture.

3. If you press view/change button, the previously added schedule information is displayed.

It can be changed with the same method as adding schedule.
If you press delete button, the selected schedule will be deleted from the list.

NOTE

!

• There are schedule setting authorities as follows according to user class.

Button

Super User

Manager

User

Query/Mod-

ify

Can view or change

all schedules

Can view all schedules

Can change the schedule created with

the corresponding ID

No authority

Add

Can add a schedule

Can add a schedule

No authority

Delete

Can delete all sched-

ules

Can delete schedules created with the

corresponding ID

No authority

Summary of Contents for V-NET PQCPC22A0






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands