Installin
g
ACP
ENGLISH
95
- If you press “SET“ button, whether to use the power display function will be applied to the sys-
tem.
But if there is no “SET” button input for certain time (about 10 sec.), the setting will not be ap-
plied to the system, it returns to the previous screen, and the previously set method will be
used.
Setting whether to display error history
LG ACCS, which is the operation program of the ACP, provides the error history function that can
review several types of errors occurred in the air conditioner indoor units connected to the ACP.
User may select whether to display the error history through LG ACCS at his or her own conven-
ience. To use the error history function, whether to use the function shall be set in the ACP. To
set whether to use the error history function, please proceed as in the following order.
- When you press the 'SET' button of the ACP, menu screen will be displayed.
Use up and down (
▲
,
▼
) buttons to select [Contents], and press “SET” button again.
While [LOG] is selected, if you press “SET” button, it will display the screen to set whether to
use the error history function.
- Use up and down (
▲
,
▼
) buttons to set whether to use the error history function.
If you press up (
▲
) button, it will be set to use the error history function, and if down (
▼
) button
is pressed, it will be set to not to use the error history function.
PQCPC22A0
n
@i
c
f
^
^
{s @log}
notHPI@O@useHQI@Z@P
{c
}
pdi
log
acp@id
P
P
P
Click SET
button
Click SET
button
PQCPC22A0
{s @log}
notHPI@O@useHQI@Z@Q
Example of setting to use the error
history function
