manualshive.com logo in svg

LG V-NET PQCPC22A0, Installation & User Manual

Share
Download
LG V-NET PQCPC22A0 Installation & User Manual Download Page 35

Ope

r

atin

g

 ACP with ACCS

ENGLISH

3

5

1

Power consumption monitor

The peak control setting information and the operation information are displayed in the power
consumption monitor.
- Function operation status
- Current operation Rate
- Target Operating Rate
- Cycle

Function operation status

The operation status of the current peak control is displayed in the function operation status. 
The types of the displayed operation status are as follows.

Current power consumption and Current Operation Rate

“Current Operation Rate” displays at what % is the power consump-
tion of the currently operated air conditioner compared to all air condi-
tioners.

Desired power consumption and Target Operating Rate

“Target Operating Rate” displays at what % is the power consump-
tion to be permitted by the user compared to all air conditioners.

Cycle

It displays the period to stop the peak operation.

For example, if it is set to 5 min. period, the air conditioners operate at peak opera-
tion every 5 min. are converted to adjust all air conditioners to stop at the same time.
Operation conversion period may be adjusted in the range of 5 min. ~ 15 min.

Operation status

Description

Peak operation ratio control function is in operation.

It is displayed when peak operation ratio control function is stopped.

Summary of Contents for V-NET PQCPC22A0






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands