LG V-NET PQCPC22A0 Installation & User Manual Download Page 75

Page: 75 / 125

Installin

ACP

ENGLISH

Installing the ACP in DIN RAIL

ACP can be installed in DIN RAIL with width 35mm and height 7.5mm.

Proceed as the follows to install the ACP in an adequate place.

The installation method of the ACP is explained here with the example of installing the ACP in

DIN RAIL.

- Decide the space to install the ACP.

- Before installing the ACP, check if it is the adequate place to connect the ACP with the power,

RS-485, and LAN cable.

- Install DIN RAIL.

- Hook the top part of the ACP on DIN RAIL.

- Push the main body of the ACP until you hear the sound of installation.

- Pull the ACP to check if it is fixed.

PQCPC22A0

②

Fixing to DIN RAIL

①

Hooking on DIN RAIL

CAUTION

• After installing to DIN RAIL, do not fix to the wall using screws.

• ACP may be damaged.

• DIN Rail fixing Screw Spec: M3, screw head height 2.0 ~ 1.75mm, screw head diameter

7.0 ~ 5.5mm

Summary of Contents for V-NET PQCPC22A0






























































































































Search results

Summary of Contents for V-NET PQCPC22A0

Reviews:

Brands by name

Popular brands

LG V-NET PQCPC22A0, Installation & User Manual

Search results

Summary of Contents for V-NET PQCPC22A0

Reviews:

Brands by name

Popular brands