LG LB645479T, Owner'S Manual

Page: 100 / 308

100
FAQs
The oven is still dirty after running the EasyClean mode. What else
should I do?
The EasyClean mode only helps to loosen light soils in your oven to assist
in hand-cleaning of your oven. It does not automatically remove all soils
after the mode. Some scrubbing of your oven is required after running the
EasyClean mode.
I tried scrubbing the oven after running EasyClean, but some soils
still remain. What can I do?
The EasyClean mode works best when the soils are fully soaked and
submerged in water before running the mode and during hand-cleaning.
If soils are not sufficiently soaked in water, it can negatively affect the
cleaning performance. Repeat the EasyClean process using sufficient
water. Sugarbased and certain grease soils are especially hard to clean.
Soils on my oven walls are not coming off. How can I get my oven
walls clean?
Soils on the side and rear walls of your oven may be more difficult to fully
soak with water. Try repeating the EasyClean process with more than the
30ml of water.
Will EasyClean get all of the soils and stains out completely?
It depends on the soil type. Sugar-based and certain grease stains are
especially hard to clean. Also, if stains are not sufficiently soaked in water,
this can negatively affect cleaning performance.
Is it safe for the convection fan, heater element to get wet during
EasyClean?
Yes. The convection fan, heater element may get a little wet during
cleaning. However, direct spray onto the heater elements is not necessary
because these are selfcleaning during regular use.
EasyClean Quick Reference Guide