LG L8UC100BFA0 Service Manual Download Page 87

Page: 87 / 153

Service Manual 87

Disassembly of the parts

2) To remove the Control Box.

• Remove securing screws.
• Pull the control box out from the chassis care-

fully.

3) To remove the Discharge Grille.

• Pull the discharge grille out from the chassis

carefully.

4) To remove the Evaporator.

• Remove screws securing the evaporator and

the holder eva.

• Unhook the tab on the right inside of the chas-

sis at the same time, slightly pull the evapora-
tor toward you until the tab is clear of the slot.

5) To remove the Cross-Flow Fan

• Loosen the screw securing the cross-flow fan

to the fan motor (do not remove).

• Lift up the right side of the cross-flow fan and

the fan motor, separate the fan motor from the
cross-flow fan.

• Remove the left end of the cross-flow fan from

the self-aligning bearing.

Summary of Contents for L8UC100BFA0


























































































































































Search results

Summary of Contents for L8UC100BFA0

Reviews:

Related manuals for L8UC100BFA0

Brands by name

Popular brands

LG L8UC100BFA0, Service Manual

Search results

Summary of Contents for L8UC100BFA0

Reviews:

Related manuals for L8UC100BFA0

Brands by name

Popular brands