- 70 -
3. Convertible Type Indoor Unit
1) Remove the Air guide - L by loosening 2
screws after removing the Inlet grille from the
Indoor unit.
2) Connect the wires to the terminals on the con-
trol board individually according to the outdoor
unit connection.
• Ensure that the color of the wires of outdoor
unit and the terminal No. are the same as
those of indoor unit respectively
R
AIR GUIDE-L
INDOOR UNIT
Control
Panel
1
2
Clamp
GN/YL
The power cord connected to the outdoor unit should be complied
with the following specifications (Rubber insulation, type H05RN-F
approved by HAR or SAA).
The connecting cable connected to the indoor and outdoor unit should
be complied with the following specifications (Rubber insulation,
type H05RN-F approved by HAR or SAA).
8.5mm
20m
m
GN/YL
7.5mm
20m
m
NORMAL
CROSS-SECTIONAL
AREA 0.75mm
2
NORMAL
CROSS-SECTIONAL
AREA 3.5mm
2
If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its
service agent.
CAUTION
Make sure that the screws of the terminal are free from looseness.
WARNING
Summary of Contents for HPCI-C35E
