LG CineBeam Al ThinQ HU710PW Owner'S Manual Download

Page: 152 / 164

ENGLISH

Troubleshooting Movie Playback Issues

Please check the list below when you experience the following symptoms during use of

the product. It may not be a failure.

For more information about supported files, see

"Using the [Media Player]".

I cannot find a file in the [Media Player].

•

Check that the files on the USB storage device can be read by a PC.

•

Check that the file extension is supported.

•

Change the filter to [All].

I get a message saying “This file is not supported” or the sound is playing

normally but the video is not.

•

Check that the file plays without any problems on a PC’s video player. Also check

for file damage.

•

Check that the file extension is supported.

•

Check that the resolution is supported.

•

Check that the video codec is supported.

•

Check that the frame rate is supported.

I get a message saying “This audio is not supported” or the video is playing

normally but the audio is not.

•

Check that the file plays without any problems on a PC’s video player. Also check

for file damage.

•

Check that the file extension is supported.

•

Check that the audio codec is supported.

•

Check that the bit rate is supported.

•

Check that the sample rate is supported.

•

Check that the audio channel separation is supported.

Summary of Contents for CineBeam Al ThinQ HU710PW





































































































































































Search results

Summary of Contents for CineBeam Al ThinQ HU710PW

Reviews:

Related manuals for CineBeam Al ThinQ HU710PW

Brands by name

Popular brands

LG CineBeam Al ThinQ HU710PW, Owner'S Manual

Search results

Summary of Contents for CineBeam Al ThinQ HU710PW

Reviews:

Related manuals for CineBeam Al ThinQ HU710PW

Brands by name

Popular brands