manualshive.com logo in svg

LG CineBeam Al ThinQ HU710PW, Owner'S Manual

Share
Download
LG CineBeam Al ThinQ HU710PW Owner'S Manual Download Page 115

59

ENGLISH

Applying the Current Picture Settings to All Inputs

 (Q. Settings)

 

→

   

→

 [Picture] 

→

 [Advanced Settings] 

→

 [Apply to All Inputs]

The settings you specify only applies to the currently selected input mode. To apply 

your current picture settings to all input modes, select [Apply to All Inputs]. 

Resetting Picture Mode

 (Q. Settings)

 

→

   

→

 [Picture] 

→

 [Advanced Settings] 

→

 [Reset]

If you want to reset the image settings to the factory defaults after configuring the 

image settings, select reset for each image mode.

[FILMMAKER MODE Auto Start]

 (Q. Settings)

 

→

   

→

 [Picture] 

→

 [Advanced Settings] 

→

 [FILMMAKER MODE 

Auto Start]
Set to [On]. When HDMI input recognizes a movie content, it switches to [FILMMAKER 
MODE] automatically.

• 

While this mode effectively conveys the creator's intention, it may appear darker 

than other Select Mode.

Summary of Contents for CineBeam Al ThinQ HU710PW





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands