manualshive.com logo in svg

LG CineBeam Al ThinQ HU710PW, Owner'S Manual

Share
Download
LG CineBeam Al ThinQ HU710PW Owner'S Manual Download Page 94

38

ENGLISH

View Computer Files

Watch content saved in your PC on the Projector

You can enjoy videos/music/photos stored on your PC on the Projector when these 

devices are connected to the same network. 

Browse the content on your PC to watch on Projector (Windows 10)

1 

Connect you projector and PC to the same network.

2 

Right-click the file you want to play and select “Cast to Device”.

3 

Select the name of the Projector you want to watch from the displayed list, 

and playback will start on that Projector.

• 

Even when multiple projectors or devices are connected, the selected file is 

played through only one device. The playback rate may vary depending on the 

network connection.

• 

To play on other operating systems or devices, refer to the manual of the 

operating system/device.

Summary of Contents for CineBeam Al ThinQ HU710PW





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands