manualshive.com logo in svg

LG CineBeam Al ThinQ HU710PW, Owner'S Manual

Share
Download
LG CineBeam Al ThinQ HU710PW Owner'S Manual Download Page 60

4

ENGLISH

 3 

You can get recommendations from various contents.

• 

You must log in to your LG account to get personalized content 

recommendations.

• 

You must connect to the network to use the recommendation 

feature.

 4 

You can run, move, and delete the apps installed on your projector.

• 

[App List] and [Top Picks For You] are automatically shown on the screen each 

time the projector is turned on. To disable this feature, set [Home Auto Launch] 

of 

 (Q. Settings)

 

→

 

 

→

 [General] 

→

 [System] 

→

 [Additional Settings] 

→

 [Home Settings] to [Off].

• 

The availability of and access to contents and services in LGE device are subject 

to change at any time without prior notice.

• 

Available features vary depending on the region or service.

Summary of Contents for CineBeam Al ThinQ HU710PW





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands