LG CineBeam Al ThinQ HU710PW Owner'S Manual Download Page 138

Page: 138 / 164

ENGLISH

To Use Audio Guidance

(Q. Settings)

→

[General]

→

[Accessibility]

→

[Audio Guidance]

If [Audio Guidance] is set to [On], audio guides will be provided in various situations,

such as when you adjust the volume or change settings and input signals.

•

[Speed]

Adjust the speed of spoken guide.

•

[Volume]

Adjust the volume of spoken guide.

•

[Pitch]

Adjust the tone of spoken guide.

•

This feature is available on certain languages only.

•

Some models may not be supported.

•

The configurable items differ depending upon model.

•

For visually impaired users.

Summary of Contents for CineBeam Al ThinQ HU710PW





































































































































































Search results

Summary of Contents for CineBeam Al ThinQ HU710PW

Reviews:

Related manuals for CineBeam Al ThinQ HU710PW

Brands by name

Popular brands

LG CineBeam Al ThinQ HU710PW, Owner'S Manual

Search results

Summary of Contents for CineBeam Al ThinQ HU710PW

Reviews:

Related manuals for CineBeam Al ThinQ HU710PW

Brands by name

Popular brands