manualshive.com logo in svg

LG CineBeam Al ThinQ HU710PW, Owner'S Manual

Share
Download
LG CineBeam Al ThinQ HU710PW Owner'S Manual Download Page 141

85

ENGLISH

[High Altitude]

 (Q. Settings)

 

→

   

→

 [Installation] 

→

 [High Altitude]

If the projector is used at an altitude higher than 1200 meters, turn this on.

Otherwise, the projector may overheat or its protection function may be activated. If 

this happens, turn the projector off and then on again after waiting for several minutes.

• 

Some models may not be supported.

[Remote Control Power]

 (Q. Settings)

 

→

   

→

 [Installation] 

→

 [Remote Control Power]

The power button on the LG TV remote control can be used separately or together with 

the projector.

• 

[Pro TV]

The power on the projector and TV can be used together.

You can turn the projector on and off with the LG TV remote control.

• 

[Projector Only]

The power on the projector and TV can be used separately.

You cannot turn the projector on and off with the LG TV remote control.

• 

Some projector models may not support this feature.

• 

Other company's products are not compatible.

Summary of Contents for CineBeam Al ThinQ HU710PW





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands