MULTI/SINGLE CAC
Indoor unit
8. Installation
12
ART COOL
8.2 Preparing work for installation
1.
Open front panel
1) Pull the upper part of the front panel
2) Lift up the panel
3) To detach the front panel, remove the two screws at the lower part
4) Detach the front panel from the body
5) To detach the panel, disconnect the connector at the upper part
2.
Removing pipe cover and side cover
1) Remove the screw of the center tuning cover.
2) Pull up the side cover of desired connecting direction, then cover side is separated.
3) Pick the pipe hole of the side cover
CAUTION
• After removing the pipe hole, cut the burr for safety.
When connecting pipe path through rear wall, don’t remove the hole.
Panel Front
Connector
Side cover
Pipe hole
