LG ABNH186HLAC, Service Manual

Page: 94 / 175

98 Universal System Air Conditioner
MPS Variable SINGLE A
8. Installation
8.1 Selection of the best location
• If a roof is built over the unit to prevent direct sunlight or rain exposure, make sure that heat radiation from the
condenser is not restricted.
• Do not place animals and plants in the path of the warm air.
• Take the air conditioner weight into account and select a place where noise and vibration are minimum.
• Select a place so that the warm air and noise from the air conditioner do not disturb neighbors.
• Rooftop Installations : If the outdoor unit is installed on a roof structure, be sure to level the unit. Ensure the
roof structure and anchoring method are adequate for the unit location. Consult local codes regarding rooftop
mounting.
More than
30cm
Fence or
obstacles
More than 70cm
More than 50cm
More than More than
30cm
30cm
More than
30cm
Sunr
oof
More than 50cm
(Service space) More than
30cm
Fence or
obstacles
More than 70cm
More than 50cm
More than More than
30cm
30cm
More than
30cm
Sunr
oof
• Ensure that the space around the back is more than 30cm and sides is more than 30cm. The front of the unit
should have more than 70cm of space.
8.2 Settlement of outdoor unit
• Anchor the outdoor unit with a bolt and nut(ø10mm)
tightly and horizontally on a concrete or rigid mount.
• When installing on the wall, roof or rooftop, anchor the
mounting base securely with a nail or wire assuming the
influence of wind and earthquake.
• In the case when the vibration of the unit is conveyed to
the hose, secure the unit with an anti-vibration rubber.
Model : AUUH12-306B, AUUH36-608B
Bolt
Tubing connection