7
206-4307
X
Commercial Mode Overview (Cont.)
Installer Menu
To create a Master TV Setup, you will need to know how to access the
commercial controller (PTC) Installer Menu and make changes to the
default values as required. If necessary, familiarize yourself with the
Installer Menu and how to make and save changes. See pages 30 to 40
for information on accessing the Installer Menu and for detailed descrip-
tions of the Installer Menu items.
TV Setup Menus
On-screen setup menus control the features of the TV. Use the Installer
Remote to access the TV setup menus, and set the TV
features to the desired configuration for the end user.
Cloning
Cloning refers to the process of using a Master TV Setup to configure
a
Target TV. The Master TV’s clonable setup menu features should be
configured as part of the Master TV Setup. If there are features in the
Master TV’s setup—channel icons or labels, digital font options, etc.—
that are not set or that are set incorrectly, those features also will not be
set or will be set incorrectly in the Target TVs. See pages 44 to 49 for
information on Clone (.tlx) files and cloning requirements and procedures.
External MPI or TLM Control
To control the TV using an external MPI control device, you must use the
TV’s MPI port for communication purposes.
To control the TV using an external TLM control device, you must use the
TV’s RS-232C port for communication purposes.
FTG Mode
In this mode, the TV’s CPU is configured with an FTG Channel Map, and
the CPU controls and restricts the tuning operation of the TV based on
this FTG Channel Map. The FTG Channel Map enables the decryption
of each Pro:Idiom
®
encrypted channel and also provides logical channel
mapping of physical RF channels (analog and digital), IP streams, and
Aux inputs. In addition, in these models, depending
on the types of channels included in the FTG Channel Map, FTG Mode
provides the option to select either logical or physical tuning (see notes
below) during configuration.
Note:
Logical channel mapping of physical RF channels eliminates dash
tuning; for example, physical 19-3 can be mapped to logical channel 9. It
also allows physical RF channels, IP streams, and Aux inputs to be listed
in any order, not only in physical numeric ascending
order. Physical channel tuning requires that you include the dash when
direct entering RF channel numbers and Aux inputs (the latter desig-
nated by 130-0 through 137-0).
Note:
Physical channel tuning is not available when IP channels are
included in the FTG Channel Map.
PTC INSTALLER MENU
xxEW960H
CPU
-
CTV
000 INSTALLER SEQ 000
UPN 000-000-000-000 SW 5331 7F60
PTC V#.##.###
CPU V#.##.##.##
Typical Installer Menu
TV Setup Menus (Advanced Settings)
TV Setup Menus (Quick Settings)
Picture
Sound
Channels
General
Safety
Accessibility
PICTURE
Smart Picture Mode
Off
Picture Mode Settings
Aspect Ratio
16:9
OLED Panel Settings
^
