LG-Ericsson GDC- 480H Manual Download Page 44 | Manualshive

Page: 44 / 70

background image

GDC-480H/500H Wireless Handset

User Guide

35

To adjust any of the Display characteristics:

1. Select the Menu to move to Display menu.
2. Use the

Navigation

( ) button to highlight the Display selection.

3. Press the

OK

( ) left soft button to access the sub-menu.

4. Use the left or right arrow of the

Navigation

( ) button to select the display

characteristic.

•

Images

•

Lighting Set

•

Dialing color

5. Press the

OK

( ) left soft button to store the setting.

6. For dialing color use the left or right arrow of the

Navigation

( ) button to select

Yes

( ), left soft button, or

No

( ), right soft button.

For back-lighting, use the

Navigation

( ) button to select the desired option.

•

Standard, back light turns Off 20 seconds after last button press.

•

Always On, back light is always ON.

•

Always Off, back light is always OFF.

•

Sleep Mode, back light turns OFF 20 seconds after last button press backlight
and handset turns OFF after 1 minute.

7. Press the

OK

( ) left soft button to store the setting.

8. Press the

End

( ) button.



Note:

To conserve battery charge, use the Standard or Sleep backlighting mode. At low battery
levels (less than two bars), the backlight turns OFF until the handset batteries are re
charged.

5.3 Sound

In the Sound sub-menu you can select the ring tone or melody for internal and external calls
as well as the ringer volume level. Also, the alerting mode can be set with the Ringing Mode
selection under this sub-menu. Under the Sound sub-menu are 4 selections:



Internal Ring: Select the ring type ( 9 kinds) and the volume level from 1 to 9.



External Ring: Select the ring type ( 9 kinds) and the volume level from 1 to 9.



Ringing Mode: Select the Ring mode type ( 4 kinds)



Silent In Charger: No sound and Flash LED when the handset is charging on

charger.

To set the internal or external ring options:

1. Select the Sound menu from the User Menu.

2. Press the

OK

( ) left soft button.

3. Use the

Navigation

( ) button to highlight a selection.



Internal Ring



External Ring

4. Press the

OK

( ) left soft button to access the Internal and External Ring Options.

5. Use the

Navigation

( ) button to highlight a selection.



Ringing Type

«
...
42
43
44
45
46
...
»

Summary of Contents for GDC- 480H







































































Reviews:

No comments

Related manuals for GDC- 480H

Brand: 8*8 Pages: 5

Brand: TCL Pages: 52

Brand: Samsung Pages: 145

Brand: Sony Ericsson Pages: 89

Brand: Alcatel Pages: 29

Brand: Quadro Pages: 125

Brand: Samsung Pages: 22

Brand: Samsung Pages: 71

Brand: Samsung Pages: 25

Brand: Samsung Pages: 26

Brand: Samsung Pages: 192

Brand: Samsung Pages: 36

Brand: Samsung Pages: 26

Brand: Samsung Pages: 22

Brand: Samsung Pages: 126

Brand: Samsung Pages: 119

Brand: Xiaomi Pages: 9

Brand: WOO Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands