manualshive.com logo in svg

LFA SACF 25, User Manual

Share
Download
LFA SACF 25 User Manual Download Page 21

21

How to Fill Capsules with the SACF 25

®

Tools and Materials Needed

•  Empty capsules
•  Raw material formulation
•  Fully assembled SACF 25

®

•  Powder scraper (comes with machine in SACF 25

® 

Toolkit)

•  Receptacle for filled capsules
•  Safety goggles
•  Disposable latex/rubber gloves (for food grade products and to protect hands from grease)
•  Hairnet and/or beard net (food grade products only)
•  Sterile shoe covers (food grade products only)

Instructions

Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this 
process. 
1. Place the receptacle for ejected capsules near the ejection chute.
2. Pour the empty capsules into the Capsule Hopper.
3. Loosen the nut and raise the gate to release the capsules into the Capsule Magazine.

4. Place the Capsule Discs onto the turntable in front of the Capsule Sewer.
 

4.1 Note: Ensure that the Capsule Discs are correctly positioned and turn clockwise.

Summary of Contents for SACF 25
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands