Lexus OM48A84U, Owner'S Manual

Page: 29 / 425

NAVIGATION SYSTEM: BASIC FUNCTIONS
31
Maintenance information
This system informs about when to replace
certain parts or components and shows
dealer information (if registered) on the
screen.
When the vehicle reaches a previously set
driving distance or date specified for a
scheduled maintenance check, the “Infor-
mation” screen will be displayed when the
navigation system is in operation.
To disable this screen, select “Do Not
Display This Message Again”.
This
screen goes off if the screen is not op-
erated for several seconds.
To prevent this information screen from be-
ing displayed again, select
“Do Not
Display This Message Again”
.
To register “Maintenance information”, see
“—Maintenance” on page 404.
This navigation system can be operated by
the Remote Touch when the “POWER”
switch is in ACCESSORY or ON mode.
A pointer is shown on the screen. Use the
Remote Touch knob to move the pointer
and select the buttons on the screen.
To select a button on the screen, place the
pointer on top of the button and then push
the
“ENTER”
button on the Remote
Touch. Once a button has been selected,
the screen will change.
When the pointer moves close to a button,
it will be automatically pulled onto that but-
ton. The strength of this pull can be ad-
justed. (See page 341.)
The pointer will disappear from the screen
if it is not moved for 6 seconds. Operation
of the Remote Touch knob will cause the
pointer to reappear.
How to use the Remote
Touch