Lexmark XM7355 User Manual Download Page 278

Page: 278 / 303

Remove the printer top cover.

Install the staple ﬁnisher.

Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

Turn on the printer.

Add the staple ﬁnisher in the print driver to make it available for print jobs. For more information, see

“Adding

available options in the print driver” on page 280

Upgrading and migrating

278

Summary of Contents for XM7355
















































































































































































































































































































Search results

Summary of Contents for XM7355

Reviews:

Related manuals for XM7355

Brands by name

Popular brands

Lexmark XM7355, User Manual

Search results

Summary of Contents for XM7355

Reviews:

Related manuals for XM7355

Brands by name

Popular brands