Lexmark XM7355 User Manual Download Page 273

Page: 273 / 303

Unpack the tray, and then remove all packing material.

Note:

If optional trays are already installed, then unlock them from the printer before lifting the printer. Do

not try to lift the printer and trays at the same time.

Install the tray on the caster base.

Note:

Make sure that the caster base wheels are locked.

CAUTION—POTENTIAL INJURY:

If the tray weight is greater than 18 kg (40 lb), then it requires two

or more trained personnel to lift it safely.

Align the printer with the tray, and then lower the printer until it

clicks

into place.

CAUTION—POTENTIAL INJURY:

If the printer weight is greater than 18 kg (40 lb), then it requires

two or more trained personnel to lift it safely.

Upgrading and migrating

273

Summary of Contents for XM7355
















































































































































































































































































































Search results

Summary of Contents for XM7355

Reviews:

Related manuals for XM7355

Brands by name

Popular brands

Lexmark XM7355, User Manual

Search results

Summary of Contents for XM7355

Reviews:

Related manuals for XM7355

Brands by name

Popular brands