Lexmark XM7355 User Manual Download Page 185

Page: 185 / 303

Remove the empty staple cartridge.

Insert the new staple cartridge.

Insert the staple cartridge holder.

Close the door.

Moving the printer

Moving the printer to another location

CAUTION—POTENTIAL INJURY:

If the printer weight is greater than 18 kg (40 lb), then it requires two or

more trained personnel to lift it safely.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

CAUTION—POTENTIAL INJURY:

When moving the printer, follow these guidelines to avoid personal

injury or printer damage:

•

Make sure that all doors and trays are closed.

•

Turn off the printer, and then unplug the power cord from the electrical outlet.

•

Disconnect all cords and cables from the printer.

•

If the printer has separate ﬂoor-standing optional trays or output options attached to it, then disconnect
them before moving the printer.

Maintaining the printer

185

Summary of Contents for XM7355
















































































































































































































































































































Search results

Summary of Contents for XM7355

Reviews:

Related manuals for XM7355

Brands by name

Popular brands

Lexmark XM7355, User Manual

Search results

Summary of Contents for XM7355

Reviews:

Related manuals for XM7355

Brands by name

Popular brands