PJL
3-81
Note:
If PostScript emulation is used to create the file on the device, it may
automatically attach a
.data
extension to the
fname
. See “File Name
Extensions” on page 6-10 for more information. For example, if
"
myfile
"
is
downloaded to flash through PostScript emulation, the
fname
on the PJL
commands is
"
myfile.data
"
.
LOPENFILE Command
Use this command to open a file on a storage device.
Syntax:
@PJL LOPENFILE DEVICE =
filedevice
FILENAME = "
fname
"
ACCESS =
accesstype
[<CR>]<LF>
LCLOSEFILE Command
Use this command to close a file on a storage device. The command is ignored if the
file does not exist on the device or if the file is not open.
Syntax:
@PJL LCLOSEFILE DEVICE =
filedevice
FILENAME = "
fname
"[<CR>]<LF>
location
START =
location
The location in the file to begin writing or reading. Use an integer that
represents an offset in bytes from the beginning of the file.
Optional for both LREADFILE and LWRITEFILE commands. If this parameter
is omitted from an LREADFILE command, a
location
of
0
(beginning of
the file) is assumed. If it is omitted from a LWRITEFILE command with an
accesstype
of
RW
, a
location
of
0
is also assumed.
If a START location is provided but it is greater than the file size, the
LREADFILE command response will contain no file data. Similarly, an
LWRITEFILE command with an
accesstype
of
RW
functions like an
LWRITEFILE command with an
accesstype
of
AP
.
Table 3-22: Variables for Flash and Disk File and Password Commands (Continued)
Parameter
Syntax
Description
