PCL
2-73
Table 2-29: Status Readback
Command / Parameters
Function / Result
ESC
*s#T
0
Invalid location (Default)
1
Use currently selected location
2
All locations
3
Internal (resident)
4
Downloaded entity
5
Cartridge
7
User-installable flash
200
Disk
Set Status Readback Location Type
Sets the status location type to the specified value.
The 5 value for Cartridge may be specified, but since your printer
does not support font cards or cartridges, the command is ignored.
The 7 value for User-installable flash is only valid when flash
memory is installed.
The 200 value is only valid when a hard disk is installed.
ESC
*s#U
0
All
1
If download, temporary; otherwise,
highest priority
2
If download, permanent; otherwise,
next higher priority
Set Status Readback Location Unit
Sets the status location unit to the specified value.
The location unit is used along with the location type to identify a
location for the Inquire Status Readback Entity command.
Note:
The unit value is interpreted differently, depending on the
location type specified.
ESC
*s#I
0
Font
1
Macro
2
User-defined pattern
3
Symbol set (for unbound scalable
fonts)
4
Font extended
Inquire Status Readback Entity
Returns the requested information set by Set Status Readback
Location Type and Set Status Readback Location Unit.
ESC
*s1M
Free Space
Returns the total available memory and the largest available block
of memory.
ESC
&r#F
0
Flush all complete pages
1
Flush all pages
Flush All Pages
Holds print jobs in the print buffer until the current job finishes
printing.
ESC
*s#X
-32767 to 32767
Default = 0
Echo
Returns # back to host computer.
