PJL
3-44
Printer Unique Variables for PostScript Emulation
The following variables are unique in some printers and are supported in PostScript
emulation only.
The
[command modifier:
value
]
parameter should be specified as
LPARM
:
POSTSCRIPT
.
For example:
@PJL SET LPARM:
POSTSCRIPT
LPICTUREGRADE=
ON
[<CR>]<LF>
To determine which variables your printer supports, see Table B-6 on page B-12.
Printer Unique LRESOURCE Variables
Use the following variables when additional storage devices are installed.
The
[command modifier:
value
]
parameter of the DEFAULT, INQUIRE, DINQUIRE,
and SET commands must be specified as
LRESOURCE:"
device:filename.filetype
"
.
For example:
@PJL DEFAULT LRESOURCE : "
device:filename.filetype
"LDESCRIPTION="my
description"[<CR>]<LF>
Values for
"
device:filename.filetype
"
are:
device
flash
,
flash1
,
disk
, or
disk1
(case insensitive)
filename
A unique identifier for a file, such as the macro ID for a PCL
macro, the symbol set ID for a PCL symbol set, the font ID for a
PCL font, or the actual file name for data, Type 1 fonts, and
demo files as shown on the Directory. The
filename
is case
sensitive.
filetype
The identifier that categorizes the file, such as
p5macro
for PCL
macros or
p5symset
for PCL symbol sets.
Using the DEFAULT command to modify any of these variables forces a write to flash
or disk if resource collection mode is set to On before the command is executed. The
DEFAULT command causes a PJL Reset.
Table 3-8: Printer Unique Variables for PostScript Emulation
Variable
Function
Selections
Factory Default
LPICTUREGRADE
PictureGrade
TM
ON, OFF
ON
LPSFONTPRIORITY
Font Priority
RESIDENT, FLASHDISK
RESIDENT
