PCL
2-2
Using Your Software Program
To select PCL emulation, use the Printer Job Language (PJL) Enter Language
Command. See “ENTER LANGUAGE Command” on page 3-3 for more information.
See “Printer Job Language” on page 3-1 for the syntax and use of PJL.
Warning:
When you change printer languages, you may lose some or all previously
downloaded resources, unless Resource Save is set to On or the
resources are stored in flash memory or on disk.
Page Formatting
The printable areas and logical pages for PCL emulation (both portrait and landscape
orientation) are illustrated below. See the Legend that follows for definitions of areas
A
through
I
.
Printable Areas
Legend:
A
Portrait physical page width and landscape physical page length
B
Portrait physical page length and landscape physical page width
C
Portrait logical page width
D
Landscape logical page width
E
Distance between the side edge of the physical page and the logical page in portrait
F
Distance between the side edge of the physical page and the logical page in landscape
