PostScript
4-67
DoPrintErrors
Boolean
Specifies whether to print an error page using a built-in error
handler when a PostScript emulation error occurs.
True
Print PS Error user default value is set to On.
False
Print PS Error user default value is set to Off.
DoStartPage
Boolean
(Read only) Always returns False.
EnableExtraFonts
1
Boolean
True
All 75 resident fonts are enabled.
False
Original 39 PostScript fonts are available.
Note:
Changes to this parameter take effect when PostScript
is restarted.
EngineBoot
1
string
(Read-only) Specifies the version of the boot code.
EngineCode
1
string
(Read-only) Specifies the version of the engine code.
EngineSpeed
1
integer
(Read-only) Maximum speed of the print engine in pages per
minute.
EnvironmentSave
2
Boolean
Indicates or modifies the Resource Save user default value.
True
Resource Save user default value is set to On.
False
Resource Save user default value is set to Off.
Note:
When a job changes this parameter from False to True,
all interpreter tasks such as PostScript and PCL are
terminated and restarted at the end of the current job.
FactoryDefaults
Boolean
If set to True and the printer is then immediately powered off,
all non-volatile parameters revert to factory default values at
the next power-on. The print job that sets FactoryDefaults to
True must be the last job executed before power-off;
otherwise, the request is ignored.
FatalErrorAddress
integer
The address at which a fatal system software error occurred.
It is stored in this parameter before execution is stopped. It is
also transmitted to the host over the communications
channel.
FontResourceDir
string
Specifies the location in the file system for font resource files.
FontVersion
1
string
(Read-only) The version of the font read-only memory (ROM).
GenericResourceDir
string
Specifies the location in the file system for resource files.
GenericResourcePathSep
string
Concatenated to the GenericResourceDir and the category
name. It is followed by the resource name to get the external
location of the resource.
Example: If GenericResourceDir and
GenericResourcePathSep were (Resource/) and (/),
respectively, the LexmarkLogo resource of the Pattern
category would be in Resource/Pattern/LexmarkLogo.
Table 4-10: PostScript Emulation System Parameters (Continued)
Key
Type
Definition
1
These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 2016.
2
These parameters are available with the Adobe PostScript Language Supplement 3010.
3
These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 3010.
