manualshive.com logo in svg

Lexmark x9350, User Manual

Share
Download
Lexmark x9350 User Manual Download Page 145

4

Press 

 or 

 repeatedly until 

Align Cartridges

 is highlighted.

5

Press  .

An alignment page prints.

If you aligned the cartridges to improve print quality, print your document again. If print quality has not improved, clean
the print cartridge nozzles.

Cleaning the print cartridge nozzles

1

Load plain paper.

2

Press 

 or 

 repeatedly until 

Maintenance

 is highlighted.

3

Press  .

4

Press 

 or 

 repeatedly until 

Clean Cartridges

 is highlighted.

5

Press  .

A page prints, forcing ink through the print cartridge nozzles to clean them.

6

Print the document again to verify that the print quality has improved.

7

If print quality has not improved, try cleaning the nozzles up to two more times.

Wiping the print cartridge nozzles and contacts

1

Remove the print cartridges.

2

Dampen a clean, lint-free cloth with water.

3

Gently hold the cloth against the nozzles for about three seconds, and then wipe in the direction shown.

 

145

Summary of Contents for x9350







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands