33
Using printer menus
USB Buffer
Configures the size of the USB
input buffer.
Note: Changing the USB
Buffer menu item
automatically resets the
printer.
Disabled
Job buffering is disabled. Any jobs
already buffered on the disk are printed
before normal processing of incoming
jobs resumes.
Auto*
Printer automatically calculates the
USB Buffer size (recommended
setting).
3K to maximum size
allowed
User specifies the USB Buffer size. The
maximum size depends on the amount
of memory in the printer, the size of the
other link buffers, and whether
Resource Save is set to On or Off. To
maximize the range for the USB Buffer
size, disable or reduce the size of the
parallel, serial, and network buffers.
Job Buffering
Temporarily stores jobs on the
printer hard disk before
printing.
Note: Changing the Job
Buffering menu item
automatically resets the
printer.
Off*
Does not buffer print jobs to the hard
disk.
On
Buffers print jobs to the hard disk.
Auto
Buffers print jobs only if the printer is
busy processing data from another
input port.
Mac Binary PS
Configures the printer to
process Macintosh binary
PostScript print jobs.
Off
Printer processes raw binary PostScript
print jobs from computers using the
Macintosh operating system.
Note: This setting often causes
Windows print jobs to fail.
On
Printer filters PostScript print jobs using
standard protocol.
Auto*
Printer processes print jobs from
computers using either Windows or
Macintosh operating systems.
ENA Address
Sets the USB port ENA
Address.
4 field IP address
Shown only if an ENA is attached
through the USB port.
ENA Netmask
Sets the USB port ENA
Netmask.
ENA Gateway
Sets the USB port ENA
Gateway.
USB flash memory
device
Enables or disables the USB
Direct interface.
Disabled
Auto*
Menu selection
Purpose
Values
