Lexmark T642 - Monochrome Laser Printer Manual Download Page 42

Page: 42 / 55

Understanding printer messages

Delete all

• Press

to delete all confidential jobs.

• Press Stop to cancel the operation.

Delete all confidential jobs

• Press

to delete all held jobs.

• Press Stop to cancel the operation.

Deleting

Wait for the message to clear.

Disabling DLEs

Wait for the message to clear.

Disabling Menus

Wait for the message to clear.

Note: While the menus are disabled, you cannot change the printer
settings from the operator panel.

Disk corrupted

The printer has attempted a disk recovery process, and cannot repair the
disk.

• Press

to reformat the disk and delete all files currently stored on

the disk.

• Select

Do not reformat

to clear the message without reformatting

the disk.

Disk Recovery x/5 yyy%

Warning:

Do not turn the printer off while this message is displayed.

The printer is attempting to recover the hard disk. Disk recovery takes
place in five phases; the operator panel displays the percent complete of
the current phase.

Wait for the message to clear.

Enabling Menus

Wait for the message to clear.

Encrypting Disk yyy%
DO NOT POWER OFF

Warning:

Do not turn the printer off while this message is displayed.

The printer is encrypting the hard disk. The percent complete is
displayed.

Wait for the message to clear.

Enter PIN

Enter the PIN you identified in the driver when you sent the confidential
job to the printer.

Enter PIN to lock

Enter the correct pin number to lock the operator panel and prevent menu
changes.

Error printing from USB drive

Wait for the message to clear.

Error reading USB drive

Wait for the message to clear.

Flushing buffer

Wait for the message to clear.

Formatting Disk yyy%

DO NOT POWER OFF

Warning:

Do not turn the printer off while this message is displayed.

The printer is formatting the hard disk. The percent complete is
displayed.

Wait for the message to clear.

Formatting Flash DO NOT POWER OFF

Warning:

Do not turn the printer off while this message is displayed.

Wait for the message to clear.

Hex Trace

The printer is in Hex Trace mode.

Insert Staple Cartridge

• Install a staple cartridge to clear the message.
• Press

to clear the message and print without using the staple

feature.

Insert Tray <x>

Insert the specified tray into the printer.

Message

Action

Summary of Contents for T642 - Monochrome Laser Printer























































Search results

Summary of Contents for T642 - Monochrome Laser Printer

Reviews:

Related manuals for T642 - Monochrome Laser Printer

Brands by name

Popular brands

Lexmark T642 - Monochrome Laser Printer, Manual

Search results

Summary of Contents for T642 - Monochrome Laser Printer

Reviews:

Related manuals for T642 - Monochrome Laser Printer

Brands by name

Popular brands