Lexmark T420 User Reference Download

Page: 75 / 159

Solving basic printer problems

Sometimes printer problems are very easy to solve. When you have a problem, first make sure that:

•

If an error light blinks, see

Understanding the operator panel lights

•

The printer power cord is plugged into the printer and a properly grounded electrical outlet.

•

The printer power switch is on.

•

The electrical outlet is not turned off by any switch or breaker.

•

Other electrical equipment plugged into the outlet is working.

•

All options are properly installed.

•

If you have checked all of the above and still have a problem, turn the printer power off, wait for
about 10 seconds, and then turn the printer power on. This often fixes the problem.

Note: If any of these do not solve your problem, see the other topics listed in

Troubleshooting

Summary of Contents for T420
































































































































































Search results

Summary of Contents for T420

Reviews:

Related manuals for T420

Brands by name

Popular brands

Lexmark T420, User Reference

Search results

Summary of Contents for T420

Reviews:

Related manuals for T420

Brands by name

Popular brands