Lexmark T420 User Reference Download

Page: 96 / 159

Understanding the operator panel
lights

Operator panel lights that are off, on, or blinking (fast or slowly) indicate printer conditions such as
printer status, intervention (for example, out of paper), or service.

Some light sequences prompt you to press the Continue button to clear a printer condition:

•

Press and release Continue briefly to restart the printer.

•

Press and release Continue twice quickly to display an error code.

•

Press and release Continue twice quickly to display additional error codes.

Press and hold Cancel until all the lights come on to reset the printer.

Press and release Cancel to cancel a print job.

Ready/Data light is on

Load/Remove Paper light is blinking

Paper Jam light is blinking slowly

Toner Low light is off

Error light is off

Press Continue light is off

Continue button

Cancel button

Summary of Contents for T420
































































































































































Search results

Summary of Contents for T420

Reviews:

Related manuals for T420

Brands by name

Popular brands

Lexmark T420, User Reference

Search results

Summary of Contents for T420

Reviews:

Related manuals for T420

Brands by name

Popular brands