45
7
Flex the sheets back and forth to loosen them, then fan them. Do not fold or crease the paper.
Straighten the edges on a level surface.
Hold the paper so the side you want to print on is face down, and the front edge of the stack is
toward the front of the tray.
For information on loading letterhead, see
Printing on letterhead
.
8
Place the stack of paper against the left side of the tray and insert it under the metal stop.
Make sure the paper fits easily under the metal stop and is not bent or wrinkled. Do not raise
the metal stop or force paper under it.
Note: Do not exceed the maximum stack height indicated by the maximum stack height
indicator. Overfilling the tray may cause jams.
Metal stop
Maximum stack
height indicator
Summary of Contents for T420
