Lexmark T420 Page 85 User Reference Download

Page: 85 / 159

Solving option problems

Problem

Solution

Option does not operate correctly
after it is installed, or it quits working.

• Turn the printer power off, wait for about 10 seconds, and turn

the printer power on. If this does not fix the problem, unplug
the printer and check the connection between the drawer and
printer.

• Make sure the option is installed and selected in the printer

driver you are using.

• For Macintosh users: Make sure the printer is set up in

Chooser.

• Optional drawer: Make sure the connection between the

optional drawer and the printer is secure. Refer to the
Setup Guide.

• Make sure the print media is loaded correctly. See

Loading

trays

for more information.

• Optional flash memory card: Make sure the flash memory

card is securely connected to the printer system board.

• Optional printer memory card: Make sure the printer

memory card is securely connected to the printer system
board.

Summary of Contents for T420
































































































































































Search results

Summary of Contents for T420

Reviews:

Related manuals for T420

Brands by name

Popular brands

Lexmark T420, User Reference

Search results

Summary of Contents for T420

Reviews:

Related manuals for T420

Brands by name

Popular brands