3
Remove the screws holding the hard disk in place.
4
Remove the hard disk.
Installing hardware options
Order of installation
CAUTION—POTENTIAL INJURY:
The printer weight is greater than 18 kg (40 lb) and requires two or
more trained personnel to lift it safely.
CAUTION—TIPPING HAZARD:
Floor-mounted configurations require additional furniture for stability.
You must use either a printer stand or printer base if you are using multiple input options. If you
purchased a printer with a similar configuration, then you may need additional furniture. For more
information, see
www.lexmark.com/multifunctionprinters
CAUTION—SHOCK HAZARD:
If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them off as well, and unplug any cables going into the printer.
Install the printer and any options you have purchased in the following order:
•
Optional 2 x 500
‑
or 2500
‑
sheet tray
•
Printer
Additional printer setup
33
