Error code Description
Action
244.29
Media feeder motor did not turn off when
lifting the tray
Go to
“Media feeder motor tray lift error service check” on
page 111
.
244.32
250/550
‑
sheet tray: Tray 4 not ready
Go to
“250/550-sheet media tray option jam service check” on
page 113
.
244.32
HCIT: Tray 4 not ready
Go to
“HCIT jam service check” on page 115
.
244.33
250/550
‑
sheet tray: The media tray was
pulled during the media pick process.
Go to
“250/550-sheet media tray option jam service check” on
page 113
.
244.33
HCIT: The media tray was pulled during the
media pick process.
Go to
“HCIT jam service check” on page 115
.
244.41
250/550
‑
sheet tray: Media feeder motor stall
in tray 4
Go to
“250/550-sheet media tray option jam service check” on
page 113
.
244.41
HCIT: Media feeder motor stall in tray 4
Go to
“HCIT jam service check” on page 115
.
244.42
250/550
‑
sheet tray: Media feeder motor
under
‑
speed in tray 4
Go to
“250/550-sheet media tray option jam service check” on
page 113
.
244.42
HCIT: Media feeder motor under
‑
speed in
tray 4
Go to
“HCIT jam service check” on page 115
.
244.43
250/550
‑
sheet tray: Media feeder motor did
not reach the required speed
Go to
“250/550-sheet media tray option jam service check” on
page 113
.
244.43
HCIT: Media feeder motor did not reach the
required speed
Go to
“HCIT jam service check” on page 115
.
244.44
250/550
‑
sheet tray: Separator pass through
motor stall in tray 4
Go to
“250/550-sheet media tray option jam service check” on
page 113
.
244.44
HCIT: Separator pass through motor stall in
tray 4
Go to
“HCIT jam service check” on page 115
.
244.45
250/550
‑
sheet tray: Separator pass through
motor under
‑
speed in tray 4
Go to
“250/550-sheet media tray option jam service check” on
page 113
.
244.45
HCIT: Separator pass through motor
under
‑
speed in tray 4
Go to
“HCIT jam service check” on page 115
.
244.46
250/550
‑
sheet tray: Separator pass through
motor did not reach the required speed.
Go to
“250/550-sheet media tray option jam service check” on
page 113
.
244.46
HCIT: Separator pass through motor did not
reach the required speed.
Go to
“HCIT jam service check” on page 115
.
245.01
250/550
‑
sheet tray: Media remains detected
by the tray 5 sensor (pass through) after
power on.
Go to
“250/550-sheet media tray option jam service check” on
page 113
.
245.01
HCIT: Media remains detected by the tray 5
sensor (pass through) after power on.
Go to
“HCIT jam service check” on page 115
.
245.02
250/550
‑
sheet tray: The media is late
reaching the sensor (input) when feeding
from tray 6.
Go to
“250/550-sheet media tray option jam service check” on
page 113
.
245.02
HCIT: The media is late reaching the sensor
(input) when feeding from tray 6.
Go to
“HCIT jam service check” on page 115
.
4063
Diagnostic information
106
Summary of Contents for M5170
