Restore held jobs?
Try one or more of the following:
•
Select
Restore
on the printer control panel to restore all held jobs stored in the printer hard disk. For
non
‑
touch
‑
screen printer models, press
to confirm.
•
Select
Do not restore
if you do not want any print jobs to be restored. For non
‑
touch
‑
screen printer models, press
to confirm.
Serial port [x] disabled [56]
Try one or more of the following:
•
Select
Continue
to clear the message. For non-touch-screen printer models, press
to confirm.
The printer discards any data received through the specified serial port.
•
Select
Reset active bin
to reset the active bin for a linked set of bins.
•
Make sure the Serial Buffer menu is set to Enabled.
Some held jobs were not restored
Select
Continue
to clear the message. For non
‑
touch
‑
screen printer models, press
to confirm.
Note:
Held jobs that are not restored remain in the printer hard disk and are inaccessible.
Standard network software error [54]
Try one or more of the following:
•
From the printer control panel, select
Continue
to continue printing. For non
‑
touch
‑
screen printer models, press
to confirm.
•
Turn off the printer and then turn it back on.
•
Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web
site at
http://support.lexmark.com
.
Standard USB port disabled [56]
From the printer control panel, select
Continue
to clear the message. For non
‑
touch
‑
screen printer models, press
to confirm.
Notes:
•
The printer discards any data received through the USB port.
•
Make sure the USB Buffer menu is not set to Disabled.
4063
Diagnostic information
228
Summary of Contents for M5170
