The printer attempts to print the Quick test page from the default paper source. If the default paper source supports
only envelopes, then the page is printed from Tray 1.
The Quick test page contains the following information:
•
Printer registration settings
•
Code levels
•
Alignment diamonds at the top, bottom, and each side
•
Horizontal lines for skew adjustment
•
General printer information, including current page count, installed memory, processor speed, serial number,
engine ID, and controller board ID
3
Check the Quick test page for the correct offset between the placement of the first scan line on the front and back
side of a duplexed sheet.
4
If adjustment is necessary, the top margin in the Registration menu must be adjusted first. The duplex top margin
offset may be adjusted next. A positive offset moves the text down the page and widens the top margin, while a
negative offset moves the text up the page and narrows the top margin.
Top Margin
This setting controls the offset between the placement of the first scan line on the front and back side of a duplex sheet.
Note:
If adjustment is necessary, the top margin in the Registration menu must be adjusted first. The duplex top
margin may be adjusted next.
To adjust this setting:
1
From the Diagnostics menu, navigate to:
Duplex tests
>
Top Margin
2
Change the margin values.
Changing the value by 1 unit moves the margin by 1/100 in. A positive value moves the text down the page and
widens the top margin. A negative value moves the text up the page and narrows the top margin.
3
Depending on the printer model, press
OK
or touch
to save the desired margin value.
Sensor Test
Use this test to determine if the duplex sensor and switches are working properly.
To run this test:
1
From the Diagnostics menu, navigate to:
Duplex Tests
>
Sensor Test
2
Testing…
appears while the printer is verifying the state of the sensor.
The control panel displays the current state of the sensor.
3
Manually actuate the sensor to make it toggle between
Open
and
Closed
. If the sensor does not toggle, then it
is malfunctioning.
4
Press
X
to exit the test.
4063
Service menus
328
Summary of Contents for M5170
