Lexmark CS943 User Manual Download Page 321

Page: 321 / 400

Action

Yes

Remove the photoconductor unit of the missing color.

Warning—Potential Damage:

Do not expose the

photoconductor unit to direct light. Extended exposure to
light may cause print quality problems.

Warning—Potential Damage:

Do not touch the

photoconductor drum. Doing so may affect the quality of
future print jobs.

Insert the photoconductor unit.

Remove the toner cartridge of the missing color.

Insert the toner cartridge of the missing color.

Print the document.

Are some colors missing on print?

Contact

customer

support

The problem is
solved.

Mottled print and dots

Note:

Before solving the problem, print the Print Quality Test Pages. From the home screen, touch

Settings

Troubleshooting

Print Quality Test Pages

Action

Yes

Step 1

Check the printer for leaked toner contamination.

Is the printer free of leaked toner?

Go to step 2.

Contact

customer

support

Step 2

From the home screen, touch

Settings

Paper

Tray

Conﬁguration

Paper Size/Type

Check if the paper size and paper type settings match the
paper loaded.

Note:

Make sure that the paper does not have texture or

rough ﬁnishes.

Do the settings match?

Go to step 4.

Go to step 3.

Troubleshoot a problem

321

Summary of Contents for CS943

















































































































































































































































































































































































































Search results

Summary of Contents for CS943

Reviews:

Related manuals for CS943

Brands by name

Popular brands

Lexmark CS943, User Manual

Search results

Summary of Contents for CS943

Reviews:

Related manuals for CS943

Brands by name

Popular brands