Lexmark CS943 User Manual Download Page 166

Page: 166 / 400

Print

Printing from a computer

Note:

For labels, card stock, and envelopes, set the paper size and type in the printer before printing the

document.

From the document that you are trying to print, open the Print dialog.

If necessary, adjust the settings.

Print the document.

Printing from a mobile device

Printing from a mobile device using Lexmark Mobile Print

Lexmark

Mobile Print allows you to send documents and images directly to a supported Lexmark printer.

Open the document, and then send or share the document to Lexmark Mobile Print.

Note:

Some third

‑

party applications may not support the send or share feature. For more information, see

the documentation that came with the application.

Select a printer.

Print the document.

Printing from a mobile device using Lexmark Print

Lexmark Print is a mobile printing solution for mobile devices running on Android

version 6.0 or later. It lets

you send documents and images to network-connected printers and print management servers.

Notes:

•

Make sure that you download the Lexmark Print application from the Google Play store and enable it in
the mobile device.

•

Make sure that the printer and the mobile device are connected to the same network.

From your mobile device, select a document from the ﬁle manager.

Send or share the document to Lexmark Print.

Note:

Some third

‑

party applications may not support the send or share feature. For more information, see

the documentation that came with the application.

Select a printer, and then adjust the settings, if necessary.

Print the document.

166

Summary of Contents for CS943

















































































































































































































































































































































































































Search results

Summary of Contents for CS943

Reviews:

Related manuals for CS943

Brands by name

Popular brands

Lexmark CS943, User Manual

Search results

Summary of Contents for CS943

Reviews:

Related manuals for CS943

Brands by name

Popular brands