Lexmark CS943 User Manual Download Page 192

Page: 192 / 400

PostScript

Menu item

Description

Print PS Error

Off*

Print a page that describes the PostScript® error.

Note:

When an error occurs, processing of the job stops, the printer

prints an error message, and the rest of the print job is ﬂushed.

Minimum Line Width

1–30 (2*)

Set the minimum stroke width.

Note:

Jobs printed in 1200 dpi use the value directly.

Lock PS Startup Mode

Off

On*

Disable the SysStart ﬁle.

Image Smoothing

Off*

Enhance the contrast and sharpness of low

‑

resolution images.

Note:

This setting has no effect on images with a resolution of 300 dpi or

higher.

Font Priority

Resident*

Flash/Disk

Establish the font search order.

Notes:

•

Resident sets the printer to search its memory for the requested font
before searching the hard disk or intelligent storage drive (ISD).

•

Flash/Disk sets the printer to search the hard disk or ISD for the
requested font before searching the printer memory.

•

This menu item appears only when a hard disk or an ISD is installed.

Wait Timeout

Off

On* (40 seconds)

Enable the printer to wait for more data before canceling a print job.

Note:

An asterisk (*) next to a value indicates the factory default setting.

PCL

Menu item

Description

Font Source

Resident*

Disk

Download

Flash

Font Card

All

Select the source which contains the default font selection.

Notes:

•

Disk and Flash appear only when a non-defective, non-protected
hard disk or intelligent storage drive (ISD) that contains fonts is
installed.

•

Download appears only if downloaded fonts exist in the printer
memory.

•

Font Card appears only when an ISD is installed.

Font Name

[List of available fonts] (Courier*)

Select a font from the speciﬁed font source.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Use printer menus

192

Summary of Contents for CS943

















































































































































































































































































































































































































Search results

Summary of Contents for CS943

Reviews:

Related manuals for CS943

Brands by name

Popular brands

Lexmark CS943, User Manual

Search results

Summary of Contents for CS943

Reviews:

Related manuals for CS943

Brands by name

Popular brands